What the SUPER Phono Interconnect is built for
The SUPER Phono Interconnect is a handcrafted-in-the-USA phono cable aimed at premium music systems with a very high-quality phonograph setup. It shares the raw materials and build quality of the SUPER RCA, but Transparent has optimized the built-in network for LP playback and the delicate signals that come from a phono cartridge.
That network is the main reason to treat this as a phono-specific cable rather than a general-purpose RCA lead. If you are working through phono cable setup questions, the answers below focus on fit, termination, length, grounding and noise.
Catalog facts that shape the decision
- SUPER Phono Interconnect: Built in two versions: RCA > RCA and DIN > RCA, with a $300 upcharge for DIN > RCA. Termination is the first compatibility question: match the cable to the connector your tonearm or phono stage actually provides.

SUPER Phono Interconnect - SUPER Phono Interconnect: Available in 1 meter, 1.5 meter, 2 meter and 10 feet (pair), in RCA > RCA. Length is a listed option, so measure the real run before ordering rather than assuming a standard length will fit.
- SUPER Phono Interconnect: Sturdy gold-plated connectors transfer power through heavy, precision-wound OFHC stranding. These are the physical details that matter when you route and seat the cable.
- SUPER Phono Interconnect: Upgradeable to ULTRA Phono or above. If you plan to move up the Transparent range later, this cable is not a dead end.
Fit, termination and length questions
- Will the SUPER Phono Interconnect connect my turntable to my phono stage?
- It depends on the connectors at both ends. The catalog lists RCA > RCA and DIN > RCA versions. Check whether your tonearm or turntable output is RCA or DIN, and confirm your phono stage input is RCA. The supplied record does not confirm compatibility with any other connector type, so do not assume an adapter will substitute.
- Should I choose RCA > RCA or DIN > RCA?
- Choose the version that matches your tonearm output. DIN > RCA is for a DIN tonearm output feeding an RCA phono stage, and it carries a $300 upcharge. If your tonearm already terminates in RCA, the standard RCA > RCA version is the listed match.
- Which length should I order?
- The RCA > RCA version comes in 1 meter, 1.5 meter, 2 meter and 10 feet, sold as pairs. Measure the actual path from turntable to phono stage, including any routing around shelves or corners, and choose the shortest listed length that covers it comfortably. The supplied information does not give a recommended maximum run, so treat length as a physical-fit decision rather than a performance claim.
- Is it sold as a single cable or a pair?
- The listed variants are pairs. Plan for a left and right channel run, which is the normal arrangement for a turntable-to-phono-stage cable.
Grounding and noise questions
- Does the SUPER Phono Interconnect include a ground wire?
- The supplied product record does not confirm a separate ground lead or its attachment method. Before ordering, check the product listing and your turntable's grounding arrangement, and confirm with your dealer if grounding is essential to your setup. Do not assume a grounding scheme that is not documented.
- How does this cable address phono noise reduction?
- Transparent optimized the built-in network specifically for LP playback and delicate phono cartridge signals, which is the catalog's stated design intent. The record does not provide shielding specifications or measured noise figures, so treat noise reduction as a design goal rather than a guaranteed number. Physical routing and secure connector seating still matter.
- Can I use it with a moving coil cartridge?
- The catalog describes the cable as optimized for delicate phono cartridge signals without naming cartridge types. It does not confirm moving magnet versus moving coil support, so confirm with your dealer if your cartridge type is a concern.
- Will it reduce hum I already have?
- The supplied information does not make that claim. Hum can come from grounding, placement near power supplies or other system issues, and the record does not provide a troubleshooting procedure. Address the source of the hum rather than expecting a cable swap to fix it.
How it fits with the rest of a Transparent system
SUPER Phono Interconnects are described as working well with other REALISTIC Transparent System Companions, providing a more refined, powerful and deeper music foundation with greater dynamics and space. The catalog also positions them above PLUS Phono on that same foundation, dynamics and space comparison.
If you are building a full Transparent loom, the upgrade path to ULTRA Phono or above means the SUPER Phono can later move up the range rather than being replaced outright. That is worth knowing before you commit to a full rewire.
What to confirm before you order
Three things settle most of the uncertainty: the connector at your tonearm output, the connector at your phono stage input, and the measured length of the run. The catalog covers RCA > RCA and DIN > RCA, four RCA lengths and a pair per order.
Grounding, cartridge-type compatibility and shielding specifics are not confirmed by the supplied record. If any of those are critical to your system, confirm them with your dealer before purchase rather than assuming.

